Why Is My Kitchenaid Microwave Not Working

11 Mar, 2021

Microwave glass tray drive coupling. There are two common reasons the stirrer stops working:

Pookie Ray makes the best coffee! Heck yes!!!!! Kitchen

If the touch pads on your microwave oven do not respond but the display lights up, the problem may be with the control board.

Why is my kitchenaid microwave not working. The microwave is supposed to be moving 400 cfm at top speed. When a pad is depressed, the voltage signal is switched back to the control board. When this happens it is most likely that the microwave stirrer is not working.

Should the interior be cleaned; If the power supply coming to your microwave isn’t proper, then this could be leading to the off display of the appliance. It does a very poor job of pulling the steam off of boiling pots, especially from pots that are on the two front burners.

Why, because is expensive and not worthit to fix. To begin with, if your microwave stopped working in the middle of cooking, it might simply be a breaker (or fuse, in an older home). The stirrer belt is broken or the drive motor is broken.

When this happens the microwave is not sending signals properly, and will think it just needs to keep running. The microwave power may be concentrating into a certain area in the microwave. Problem with the ceramic fuse another cause of the problem of microwave stopped working, no power could be the ceramic fuse.

If too much current passes through the microwave circuitry, the line fuse will blow. Below are the steps you can follow to solve your microwave issue. If your microwave just keeps going and going until the door is opened, and the “stop” button is unresponsive, the most likely cause is the control board being faulty, or damaged.

We use cookies to give you the best possible experience on our website. Below are the steps you can follow to solve your microwave issue. Troubleshooting a kitchenaid microwave that won't turn on.

If the microwave turntable is not turning the glass tray drive coupling could be broken or stripped out. Unplug the microwave and then access the. If your microwave’s stirrer is not functioning properly and the energy is being concentrated in one area, it can lead to sparking and burning.

The components that could stay on when the door is open, but the door switch isn’t working are the fan motor, stirrer motor, and interior light. Remove and clean turntable hub, support and rollers. The control board generates a low voltage that is supplied to the membrane switch.

Troubleshooting a kitchenaid microwave that is not heating. I have installed an over the range microwave oven and it doesn't pull anywhere near as much steam as my previous low powered range hood that didn't have a microwave. If there are sparks in the microwave and there is no metal objects in it, you may have a faulty part.

Check the power cord for any damage and make sure that it is snugly placed into the electrical outlet in the wall. To determine if the line fuse is at fault, use a multimeter to t.est it for continuity. I fixed nearly 200 microwave ovens ( customers returns from shops) and only about 4 magnetrons need replacement, usualy in branded models.

The thing is, i've found pushing on the door handle or a light 'thump', is usually enough to start the microwave heating when it's not (or stop it sometimes, if it was heating.) there's a noticeable 'thrum' (noise of some electrical part engaging) when that happens, even after the. If the breaker promptly blows again, there's an issue with the microwave and you should stop using it. Check for error or display codes

When the kitchenaid microwave display is blank, it could mean that the power has been disrupted to the unit. Your microwave oven not working? If the microwave is not starting and display is also blank then ceramic fuse may be defected.

Another possible cause for the microwave display not working is a faulty power supply. I am sure tht many answers blame magnetron is faulty. Gently pull the coupling off the drive motor shaft to inspect the drive coupling for damage.

If the line fuse blows, the microwave won’t start. If your microwave is not heating, there are a couple of things that you can do to troubleshoot. If the fuse does not have continuity, replace it.

There is a hook or latch on the microwave door which activates the door switch, located inside the cabinet. Clean out the microwave of any excess food particles. Check for error or display codes

If your microwave will not turn on, there are a couple of things that you can do to troubleshoot. How to test a microwave door interlock switch with a multimeter: Check your panel, reset it if necessary and try again.

Check to see if the microwave is heating; High voltage transformer is rare to get faulty ( about 2 out 200 ). My microwave kicks on when the door is opened.

20 Amazing Kitchen Aid Mixer Attachments Mixer